Your Location： 
Fiber Splicer（EFS-70）
Product Description
The EFS-70 single-core fiber splicer is a precision communication device specially designed for the fusion of pump fibers and double-clad fibers, suitable for fibers with a cladding diameter of 125~350μm. Equipped with 6-motor core alignment technology, it supports both core alignment and cladding alignment modes, boasting advantages such as low fusion loss, easy operation and long battery life. Integrated with functions like fusion record, image storage and intelligent error prompt, the device features a compact and portable body, meeting the needs of both indoor precision operation and outdoor field construction. It is widely used in optical fiber communication engineering, optical fiber device packaging, power communication optical cable splicing and other scenarios.
Features
⚫ Built-in high-capacity lithium battery
⚫ Display of fiber cutting and offset angle
⚫ 6-motor alignment
⚫ Support for core alignment and cladding alignment
Specification
Parameter | Unit | Specification | |
Fiber Cladding Diameter | μm | 125~350 | |
Alignment Mode | - | Core alignment, Cladding alignment | |
Typical Loss - SMF | dB | 0.02 | |
Typical Loss - MMF | dB | 0.01 | |
Minimum Cutting Length | - | Coating 250 μm: 8–16 mm Coating >250 μm: 16 mm | |
Fusion Loss Estimation | - | Supported | |
Electrode Life | times | 5000 | |
Applicable Protection Sleeve | mm | 10~60 | |
CCD Pixels | pix | 500 | |
Operating Humidity | %RH | 50~60 | |
Operating Temperature | ℃ | -20~+50 | |
Power Supply | Adapter | V | 220 |
Built-in Battery) | V/A | 12.6/5 | |
Dimension（L*W*H） | mm | 258×152×169 | |
Standard Accessory List
Accessory | Model | Unit | Quantity |
Fiber Fusion Splicer | EFS-70 | set | 1 |
Power Adapter | / | set | 1 |
Electrode Rods | / | pair（2 pcs） | 1 |
Certificate of Conformity | / | copy | 1 |
Warranty Card | / | copy | 1 |
User Manual | / | copy | 1 |
Portable Carrying Case | / | piece | 1 |
